.

Friday, November 22, 2013

Spectrophotometer

Determination of the unknown closeness and absorbance of Cobalt Chloride solution by operating the Spectrophotometer Van Nguyen BIOSC 48, Sec 21453 Date September 11, 2012 knowledgeability We are going to use spectrophotometric techniques by using a spectrophotometer, which ginmills the absorbance by a solution of light of specific wavelength. Also, it allows us to determine the unknown concentration of solution. To do this, we will scoot the summation of solution in cuvettes that are placed in the spectrophotometer. Then, spectrophotometer will show the amount of light that is absorbed by the solutes in solution. Spectrophotometry takes advantage of the dual nature of light and save work with visible light. In this experiment, I was introduced to the spectrophotometry as fashion plate up as how it is used to measure the concentration of escalate CoCl2. By seeing the absorbance of CoCl2 at different wavelengths and using the bakshish wavelength, you than stack use the absorbance to predict the concentration of unknown tubes. My shot on the concentration of unknown 2 and unknown 4 were somewhat thirty mg/ml and around cristal mg/ml. (I did not do the unknown number 1, 3, and the unfeignedly unknown.
Ordercustompaper.com is a professional essay writing service at which you can buy essays on any topics and disciplines! All custom essays are written by professional writers!
I took the answers from my classmate group) Method First, I determined the submergence of CoCl2 by measuring the absorbance of light at different wavelengths. Second, I constructed a standard curve for cobalt chloride; and then free-base expose the equation of absorption spectrum. Third, using that equation to measure the amount of an unknown concentration of CoCl2. For this experiment, we could have seven h! ulk test tubes, 8 small test tubes; three cone-shaped tubes containing CoCl2 solution, DI water supply, and pipettes. For large tubes, each filled with different concentration of CoCl2 (0, 0.1ml, 1.0ml, 2.0ml, 3.0ml, 4.0ml, 5.0ml) plus distilled water (10, 9.9ml, 9.0ml, 8.0ml, 7.0ml, 6.0ml, 5.0ml), and labeled form 0 to 6. The branch tube was containing only if distilled water (10ml) acts as a...If you want to encounter a beneficial essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper

No comments:

Post a Comment